Replaced wiring for elevator trim servo. Completed the cable between the connector and the servo itself. Reused the original numbered sleeves and connectors. Cleaned and reused the original spiral wrap in its original position.
Completed the tail end of the servo wiring and attached the plug to the fuselage.
Double and triple checked the connections and the circuitry. All good.
I should also mention that I recently received an e-mail from a Dalotel enthusiast in Poland who's building a 1/3 scale model of the plane. Hello Arkadiusz. I've been fortunate enough to "meet" Dalotel enthusiasts from all over the world through this site. I know of many enthusiasts from France, Austria, Poland, Brazil, USA, and Canada. If you've been following the build and I haven't heard from you directly, Hello.